The difference between automatic glue box sticking machine and semi-automatic

Recently, customer Mr. Wang found Kejia Adhesive and needed a silicone adhesive plastic glue. The company's products to be bonded did not have positioning holes, and he hoped that it can quickly cure low whitening performance glue. Ask: What can avoid quick drying? The rapid curing of the type of glue causes a slight deviation in the position of the product adhesion and the low whitening glue product. For this case, Kejia recommends the use of KJ-460 slow drying low whitening silicone adhesive plastic glue glued by Kejia. For the reasons, please see The following analysis.

KJ-460 is a one-component transparent, low whitening, low odor glue, suitable for bonding plastics, silicone, metal, ceramics, wood and other materials, with fast curing, high strength bonding and other characteristics;

The slow-drying KJ-460 can be used to meet the demands, but because the silica gel is an inert material, it needs to be treated with KJ-770 silica gel treatment agent before bonding. ABS plastic bonding, if it is glued directly without treatment, it will not stick, so it must be used together with silicone treatment agent.

1. Silica gel material: Before bonding, the adhesive surface needs to be treated with a silica gel treatment agent, and then be bonded after 2-3 minutes of evaporation.

2. Spread the glue evenly on the bonding surface and then stick it.

3. Generally, the adhesive can be fixed in about two minutes, and the adhesive cannot be separated or moved in the middle, so as not to affect the adhesive strength.